Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

74,00 €
ja 14,99 € toimitus

Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

  • Merkki: Unbranded
Myynyt:

Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

  • Merkki: Unbranded

74,00 €

Tallenna 95,00 € (56%)

ovh.

169,00 €
Varastossa
ja 14,99 € toimitus
Myynyt:

74,00 €

Tallenna 95,00 € (56%)

ovh.

169,00 €
Varastossa
ja 14,99 € toimitus

Hyväksymme seuraavat maksutavat

Kuvaus

Features: Watchy is an E-Paper watch with open source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a wearable development platform. Watchy's E-Paper display delivers a beautiful crisp image clearly visible under bright sunlight, Ultra-low-power e-paper 1.54 INCH display, a At 200x200 pixels and monochrome, the display offers a distinctive aesthetic. Watchy has both WiFi & Bluetooth LE connectivity, allowing it to connect with internet APIs (e.g. Weather, News, Traffic, Maps, Spotify, etc.), as well as Bluetooth enabled devices. We chose the ESP32 for its large community and support for a wide variety of development options (for Arduino, Micropython, ESP-IDF, Zephyr-RTOS, etc.)<br><br>Specification: 1.3-axis accelerometer with gesture detection 2.Real-time clock for accurate time keeping with calendar and alarm functions 3.Built-in USB-to-serial adapter for programming on the go 4.Vibration motor for alerts 5.Four tactile buttons 6.Special Note: Be sure to select hardware version V2.0 when rooting. 7.Note: Not waterproof Note: 1. Click Set Wifi in the watch main menu. 2. Connect to the "Watchy Ap" wifi from another device, such as a mobile phone or computer/laptop. 3. Open 192.168.4.1 in your browser. On an iPhon, this page opens on its own when connected to wifi. 4. Click on "Configure WiFi" 5. Enter the SSID and password. (Note: SSID can be pre-filled through the network listed at the top of this screen) 6. Click the "Save" button and wait for Watchy. Seven. If the connection fails, the watch will display "Setup failed and timed out!" Otherwise, the local IP address and SSID of the connected network are displayed and confirmed.<
  • Fruugo ID: 430073404-903319171
  • EAN: 8720389221415

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: 14,99 € - Toimitus välillä pe 21 marraskuuta 2025–pe 28 marraskuuta 2025

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Therobe Store 2
  • Dongguan Lifeng Filter Trading Co., Ltd.
  • No. 31, Dongxia 8th Alley, Building 1, Room 602
  • Dongguan
  • CN
  • 523901
  • gserghe5566@163.com
  • 18506810445

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • Prolinx GmbH
  • Prolinx GmbH
  • Brehmstr.56,Duesseldorf,Germany
  • Duesseldorf
  • DE
  • 40225
  • eu@eulinx.eu
  • 2113105498