PDB: Input voltage range: 8~60V (3~12S LiPo) 4x70A cont, 4x110A burst 4x ESC power /signal/ telemetry pads Current Senor: 440A, 3.3V ADC, Scale 75 2x LED indicators for 5V, 12V 1K:20K voltage divider built-in JST- 8pin connector "V" pad: 12V or VBat voltage selectable G: GND Curr: current sensor signal : for BlHeli32 ESC telemetry S1~S4: ESC signal BEC 5V output (5V pad) Voltage: 5.1 +/- 0.1VDC Continuous current 5 Amps, Max.6A Short-circuit tolerant (2 seconds) Overcurrent protection & self-recovery BEC 12V output (12V pad) Voltage: 12.0 +/- 0.2VDC (Input voltage equal 12V) Continuous current 4 Amps, Max.5A Input voltage Less than 12V, Output voltage = Input voltage Short-circuit tolerant (2 seconds) Overcurrent protection & self-recovery Switchable 12V output (12VSW pad) 12V ON/OFF switchable via PINIO(high/low level) support constant 2A can be use for powering VTX,LED etc. BEC 3.3V output Linear Regulator Continuous current: 500mA Due to different product batches, the appearance , which does not affect the use Colour:Blue Material:Composite Materials Package Contents: 1x FCHUB-12S V2 1x SH1.0_8pin cable 5cm 2x SH1.0_8pin connectors Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.