Waveshare Open429I-C Standard, STM32F4 Development Board

Waveshare Open429I-C Standard, STM32F4 Development Board STM32 development board designed for STM32F429I, features the STM32F429IGT6 MCU, and integrates various standard interfaces, pretty easy for peripheral expansions. Overview 1. Open429I-C is an STM32 development board designed for the STM32F429IGT6 microcontroller, consists of the mother board and the MCU core board Core429I. 2. The Open429I-C supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers. What has on the mother board 1. MCU core board connector: for easily connecting the Core429I 2. USART3 interface: easily connects to RS232, RS485, USB TO 232, etc. 3. DCMI interface: for connecting camera 4. Capacitive touch panel interface: for connecting capacitive touch panel 5. CAN2 interface: for connecting CAN modules 6. CAN1 interface: for connecting CAN modules 7. SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI 8. ULPI interface: for connecting high-speed USB peripheral (the STM32F429I integrates USB HS controller without any PHY device) 9. LCD interface 1: for connecting 7inch LCD 10. ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc. 11. LCD interface 2: for connecting 4.3inch LCD 12. I2C2I2C3 interface: easily connects to I2C peripherals such as IO expander (PCF8574), EEPROM (AT24Cxx), etc. 13. SAI1 interface: for connecting audio modules like UDA1380 module 14. Ethernet interface: for connecting Ethernet modules 15. USB connector: USB to UART via the onboard convertor PL2303 16. SPI1SPI2 interfaces: - Easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc. - Easily connects to ADDA modules (SPI1 features ADDA alternative function) 17. I2S2